Università Roma Tre

It presents an overview of Earth Sciences, illustrating the basic concepts of geology: the form, materials, internal dynamics, geological cycles. It provides the basic tools for reading and interpretation of geological maps at different scales. It provides the skills necessary to interpret the geological survey. It provides information relating to natural hazards, natural resources and environmental impact

THE AIM OF THE CLASS IS TO ACQUIRE THE KNOWLEDGE OF THE MATERIALS USED IN CIVIL ENGINEERING, TO PERFORM TESTS ON MATERIALS AND TO COMPREHEND THE ENVIRONMENTAL IMPACT FROM THEIR USE.

TEACHING MAKES THE GENERAL TERMS, EVEN IN RELATION TO REGIONAL AND NATIONAL LEGISLATION ON WASTE MANAGEMENT (COLLECTION, TREATMENT AND DISPOSAL) AND RECLAMATION OF CONTAMINATED SITES.

The course aims to provide students with basic knowledge regarding the management of public works in the field of civil engineering. Particular references will be done to the current regulations, the administrative procedures, and conceptual and methodological aspects from which the related technical activities derive.

TEACHING IS TO PROVIDE THE KEY ELEMENTS FOR THE DESIGN OF WASTE WATER TREATMENT PLANT. WILL BE ANALYZED ASPECTS CONCERNING THE WATER POLLUTION AND THE BASIC PRINCIPLES OF WASTEWATER DOMESTIC TREATMENT.

TO PROVIDE THE FUNDAMENTAL ELEMENTS OF PROBABILITY THEORY AND MATHEMATICAL STATISTICS, ALONG WITH SOME TOOLS OF PARAMETRIC STATISTICS, WHICH MAY BE USEFUL IN PRACTICE.

ITALIAN DECREE 81.08 AND BS OHSAS 18001:07. WHY ORGANIZATIONS ARE IMPLEMENTING AN OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS) AS PART OF THEIR RISK MANAGEMENT STRATEGY TO ADDRESS CHANGING LEGISLATION AND PROTECT THEIR WORKFORCE? THE ITALIAN DVR (RISK ASSESSMENT DOCUMENT) AND THE ART. 30. THE OHSMS AS A TOOL OF PROMOTION OF SAFE AND HEALTHY WORKING ENVIRONMENT. LEGISLATIVE COMPLIANCE AND OVERALL PERFORMANCE IMPROVING.OHSAS 18001:07 E UNI INAIL GUIDE LINES. THE INTERNATIONALLY RECOGNIZED ASSESSMENT SPECIFICATION FOR OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS. THE OHSAS 18001:07 COMPATIBILITY WITH ISO 9001 AND ISO 14001. THE PLAN – DO –CHECK – ACT SYSTEM. THE DEMING WHEEL.IMPROVING THE OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS). PLANNING FOR HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL. OHSAS MANAGEMENT PROGRAMME. STRUCTURE AND RESPONSIBILITY. TRAINING, AWARENESS AND COMPETENCE. CONSULTATION AND COMMUNICATION. OPERATIONAL CONTROL. EMERGENCY PREPAREDNESS AND RESPONSE. PERFORMANCE MEASURING, MONITORING AND IMPROVEMENT.OHSAS 18001:07 CONCLUSIONS. OHSMS AS AN EFFECTIVE TOOL TO REDUCE THE RISKS ASSOCIATED WITH HEALTH AND SAFETY IN THE WORKING ENVIRONMENT FOR EMPLOYEES, CUSTOMERS AND THE GENERAL PUBLIC. DATA AND CASE STUDIES.

THE COURSE OBJECTIVE IS TO PROVIDE AT STUDENTS SUITABLE LECTURES FOR AN INTRODUCTION TO THE ELECTRICAL ENGINEERING.

The course include a wide set of concepts related to the main topics belonging to applied ecology arena. During the course the students have the opportunity of investigate the project cycle (analysis of biodiversity values, quantification, identifiation of anthropogenic threats, development of specific response strategies following plans, projects, management actions).

To provide basic knowledge on major theoretical, methodological and operational issues involved in surveying, so that the student can acquire the necessary skills to design and perform a survey and to process the data related to it. We discuss the basic principles of geodesy and cartography, the principles of surveying and the quantities that can be measured with the topographical instruments, both terrestrial and satellite, the survey methods and the treatment of observations.

GEOTECHNICAL ANALYSIS, DESIGN CRITERIA AND CONSTRUCTION TECHNIQUES OF FOUNDATIONS AND RETAINING STRUCTURES.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

THE AIM OF THE COURSE IS TO PROVIDE THE TOOLS FOR STRUCTURAL ASSESSMENT OF EXISTING CONSTRUCTIONS. THE MAIN ISSUES CONCERNING MASONRY AND R.C. STRUCTURES ARE CONSIDERED, INCLUDING RECURRING FAILURE CONDITIONS, INSPECTION METHODS, STRENGTHENING CRITERIA AND STRUCTURAL REHABILITATION TECHNIQUES.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

The main goal of the course is to provide students with the necessary logical and analytical tools to face the analysis of economic phenomena, with a particular focus on the identification of production methods, the association between prices and other distributive variables, the different logical path behind different markets

THE PURPOSE OF THE COURSE IS TO FURNISH AN INTRODUCTION TO APPROXIMATE VARIATIONAL METHODS AND TO DIFFERENCE METHODS APPLIED TO ENGINEERING PROBLEMS. MATHEMATICAL MODELS FOR HYDRAULIC AND STRUCTURAL ENGINEERING WILL BE NUMERICAL SOLVED BY COMPUTER USING THE SOFTWARE MATHEMATICA

The course is divided into two parts:
- a first section (6 CFU) aims at providing students with specific tools in order to: (i) assess the environmental value of business initiatives and their environmental sustainability; (ii) deal with environmental communication and environmental auditing. Specific attention will be paid to issues relating to the management of green energy, water and the waste cycle and with reference to the legal aspects relating to business environmental regulations.
- another section (3 CFU) analyses the issues relating to sustainable business by considering a dual perspective: a production-related viewpoint and a distribution-related aspect.

The course aims at providing the knowledge necessary to evaluate heat transfer processes (conduction, convection, radiation) between bodies and inside a body, as well as the temperature variations these processes cause. Another area is that of indoor thermal comfort.

THE OBJECTIVE OF THE COURSE IS THE DEFINITION OF MODEL FOR THE SIMULATION OF ENVIRONMENTAL HYDRAULICS PHOENOMENA

It presents an overview of Earth Sciences, illustrating the basic concepts of geology: the form, materials, internal dynamics, geological cycles. It provides the basic tools for reading and interpretation of geological maps at different scales. It provides the skills necessary to interpret the geological survey. It provides information relating to natural hazards, natural resources and environmental impact

TEACHING MAKES THE GENERAL TERMS, EVEN IN RELATION TO REGIONAL AND NATIONAL LEGISLATION ON WASTE MANAGEMENT (COLLECTION, TREATMENT AND DISPOSAL) AND RECLAMATION OF CONTAMINATED SITES.

THE PURPOSE OF THE COURSE IS TO FURNISH AN INTRODUCTION TO APPROXIMATE VARIATIONAL METHODS AND TO DIFFERENCE METHODS APPLIED TO ENGINEERING PROBLEMS. MATHEMATICAL MODELS FOR HYDRAULIC AND STRUCTURAL ENGINEERING WILL BE NUMERICAL SOLVED BY COMPUTER USING THE SOFTWARE MATHEMATICA

ITALIAN DECREE 81.08 AND BS OHSAS 18001:07. WHY ORGANIZATIONS ARE IMPLEMENTING AN OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS) AS PART OF THEIR RISK MANAGEMENT STRATEGY TO ADDRESS CHANGING LEGISLATION AND PROTECT THEIR WORKFORCE? THE ITALIAN DVR (RISK ASSESSMENT DOCUMENT) AND THE ART. 30. THE OHSMS AS A TOOL OF PROMOTION OF SAFE AND HEALTHY WORKING ENVIRONMENT. LEGISLATIVE COMPLIANCE AND OVERALL PERFORMANCE IMPROVING.OHSAS 18001:07 E UNI INAIL GUIDE LINES. THE INTERNATIONALLY RECOGNIZED ASSESSMENT SPECIFICATION FOR OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS. THE OHSAS 18001:07 COMPATIBILITY WITH ISO 9001 AND ISO 14001. THE PLAN – DO –CHECK – ACT SYSTEM. THE DEMING WHEEL.IMPROVING THE OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS). PLANNING FOR HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL. OHSAS MANAGEMENT PROGRAMME. STRUCTURE AND RESPONSIBILITY. TRAINING, AWARENESS AND COMPETENCE. CONSULTATION AND COMMUNICATION. OPERATIONAL CONTROL. EMERGENCY PREPAREDNESS AND RESPONSE. PERFORMANCE MEASURING, MONITORING AND IMPROVEMENT.OHSAS 18001:07 CONCLUSIONS. OHSMS AS AN EFFECTIVE TOOL TO REDUCE THE RISKS ASSOCIATED WITH HEALTH AND SAFETY IN THE WORKING ENVIRONMENT FOR EMPLOYEES, CUSTOMERS AND THE GENERAL PUBLIC. DATA AND CASE STUDIES.

To provide basic knowledge on major theoretical, methodological and operational issues involved in surveying, so that the student can acquire the necessary skills to design and perform a survey and to process the data related to it. We discuss the basic principles of geodesy and cartography, the principles of surveying and the quantities that can be measured with the topographical instruments, both terrestrial and satellite, the survey methods and the treatment of observations.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

THE AIM OF THE COURSE IS TO PROVIDE THE TOOLS FOR STRUCTURAL ASSESSMENT OF EXISTING CONSTRUCTIONS. THE MAIN ISSUES CONCERNING MASONRY AND R.C. STRUCTURES ARE CONSIDERED, INCLUDING RECURRING FAILURE CONDITIONS, INSPECTION METHODS, STRENGTHENING CRITERIA AND STRUCTURAL REHABILITATION TECHNIQUES.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

To provide students with basic knowledge of Coastal and Maritime Engineering. Understanding of the basic meteoceanographic and hydraulic coastal processes: wind, currents, tides, waves. To provide with the fundamental design tools/methods for the design of coastal structures, with specific reference to rubble mound and caisson breakwaters. Basic rules for planning and designing harbours, with specific reference to marinas.

THE AIM OF THE CLASS IS TO ACQUIRE THE KNOWLEDGE OF THE MATERIALS USED IN CIVIL ENGINEERING, TO PERFORM TESTS ON MATERIALS AND TO COMPREHEND THE ENVIRONMENTAL IMPACT FROM THEIR USE.

The main goal of the course is to provide students with the necessary logical and analytical tools to face the analysis of economic phenomena, with a particular focus on the identification of production methods, the association between prices and other distributive variables, the different logical path behind different markets

The course is divided into two parts:
- a first section (6 CFU) aims at providing students with specific tools in order to: (i) assess the environmental value of business initiatives and their environmental sustainability; (ii) deal with environmental communication and environmental auditing. Specific attention will be paid to issues relating to the management of green energy, water and the waste cycle and with reference to the legal aspects relating to business environmental regulations.
- another section (3 CFU) analyses the issues relating to sustainable business by considering a dual perspective: a production-related viewpoint and a distribution-related aspect.

The course aims to provide students with basic knowledge regarding the management of public works in the field of civil engineering. Particular references will be done to the current regulations, the administrative procedures, and conceptual and methodological aspects from which the related technical activities derive.

TEACHING IS TO PROVIDE THE KEY ELEMENTS FOR THE DESIGN OF WASTE WATER TREATMENT PLANT. WILL BE ANALYZED ASPECTS CONCERNING THE WATER POLLUTION AND THE BASIC PRINCIPLES OF WASTEWATER DOMESTIC TREATMENT.

TO PROVIDE THE FUNDAMENTAL ELEMENTS OF PROBABILITY THEORY AND MATHEMATICAL STATISTICS, ALONG WITH SOME TOOLS OF PARAMETRIC STATISTICS, WHICH MAY BE USEFUL IN PRACTICE.

THE COURSE OBJECTIVE IS TO PROVIDE AT STUDENTS SUITABLE LECTURES FOR AN INTRODUCTION TO THE ELECTRICAL ENGINEERING.

The course aims at providing the knowledge necessary to evaluate heat transfer processes (conduction, convection, radiation) between bodies and inside a body, as well as the temperature variations these processes cause. Another area is that of indoor thermal comfort.

The course include a wide set of concepts related to the main topics belonging to applied ecology arena. During the course the students have the opportunity of investigate the project cycle (analysis of biodiversity values, quantification, identifiation of anthropogenic threats, development of specific response strategies following plans, projects, management actions).

GEOTECHNICAL ANALYSIS, DESIGN CRITERIA AND CONSTRUCTION TECHNIQUES OF FOUNDATIONS AND RETAINING STRUCTURES.

It presents an overview of Earth Sciences, illustrating the basic concepts of geology: the form, materials, internal dynamics, geological cycles. It provides the basic tools for reading and interpretation of geological maps at different scales. It provides the skills necessary to interpret the geological survey. It provides information relating to natural hazards, natural resources and environmental impact

THE AIM OF THE CLASS IS TO ACQUIRE THE KNOWLEDGE OF THE MATERIALS USED IN CIVIL ENGINEERING, TO PERFORM TESTS ON MATERIALS AND TO COMPREHEND THE ENVIRONMENTAL IMPACT FROM THEIR USE.

TEACHING MAKES THE GENERAL TERMS, EVEN IN RELATION TO REGIONAL AND NATIONAL LEGISLATION ON WASTE MANAGEMENT (COLLECTION, TREATMENT AND DISPOSAL) AND RECLAMATION OF CONTAMINATED SITES.

THE COURSE DEVELOPS THE PRINCIPAL NOTIONS OF HYDROLOGY, BOTH SURFACE AND SUBSURFACE, AND INTRODUCES THE MODELING PROCEDURES FOR THE MAIN HYDROLOGICAL FEATURES OF PRACTICAL INTEREST. THE COURSE IS DIVIDED IN TWO PARTS: (I) A SERIES OF LECTURES FOCUSES ON THE BASIS KNOWLEDGE OF THE HYDROLOGICAL SCIENCE AND (II) TWO STUDY CASES TO BE DEVELOPED BY THE CLASS.

The course aims to provide students with basic knowledge regarding the management of public works in the field of civil engineering. Particular references will be done to the current regulations, the administrative procedures, and conceptual and methodological aspects from which the related technical activities derive.

TEACHING IS TO PROVIDE THE KEY ELEMENTS FOR THE DESIGN OF WASTE WATER TREATMENT PLANT. WILL BE ANALYZED ASPECTS CONCERNING THE WATER POLLUTION AND THE BASIC PRINCIPLES OF WASTEWATER DOMESTIC TREATMENT.

TO PROVIDE THE FUNDAMENTAL ELEMENTS OF PROBABILITY THEORY AND MATHEMATICAL STATISTICS, ALONG WITH SOME TOOLS OF PARAMETRIC STATISTICS, WHICH MAY BE USEFUL IN PRACTICE.

ITALIAN DECREE 81.08 AND BS OHSAS 18001:07. WHY ORGANIZATIONS ARE IMPLEMENTING AN OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS) AS PART OF THEIR RISK MANAGEMENT STRATEGY TO ADDRESS CHANGING LEGISLATION AND PROTECT THEIR WORKFORCE? THE ITALIAN DVR (RISK ASSESSMENT DOCUMENT) AND THE ART. 30. THE OHSMS AS A TOOL OF PROMOTION OF SAFE AND HEALTHY WORKING ENVIRONMENT. LEGISLATIVE COMPLIANCE AND OVERALL PERFORMANCE IMPROVING.OHSAS 18001:07 E UNI INAIL GUIDE LINES. THE INTERNATIONALLY RECOGNIZED ASSESSMENT SPECIFICATION FOR OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS. THE OHSAS 18001:07 COMPATIBILITY WITH ISO 9001 AND ISO 14001. THE PLAN – DO –CHECK – ACT SYSTEM. THE DEMING WHEEL.IMPROVING THE OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS). PLANNING FOR HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL. OHSAS MANAGEMENT PROGRAMME. STRUCTURE AND RESPONSIBILITY. TRAINING, AWARENESS AND COMPETENCE. CONSULTATION AND COMMUNICATION. OPERATIONAL CONTROL. EMERGENCY PREPAREDNESS AND RESPONSE. PERFORMANCE MEASURING, MONITORING AND IMPROVEMENT.OHSAS 18001:07 CONCLUSIONS. OHSMS AS AN EFFECTIVE TOOL TO REDUCE THE RISKS ASSOCIATED WITH HEALTH AND SAFETY IN THE WORKING ENVIRONMENT FOR EMPLOYEES, CUSTOMERS AND THE GENERAL PUBLIC. DATA AND CASE STUDIES.

THE COURSE OBJECTIVE IS TO PROVIDE AT STUDENTS SUITABLE LECTURES FOR AN INTRODUCTION TO THE ELECTRICAL ENGINEERING.

The course include a wide set of concepts related to the main topics belonging to applied ecology arena. During the course the students have the opportunity of investigate the project cycle (analysis of biodiversity values, quantification, identifiation of anthropogenic threats, development of specific response strategies following plans, projects, management actions).

To provide basic knowledge on major theoretical, methodological and operational issues involved in surveying, so that the student can acquire the necessary skills to design and perform a survey and to process the data related to it. We discuss the basic principles of geodesy and cartography, the principles of surveying and the quantities that can be measured with the topographical instruments, both terrestrial and satellite, the survey methods and the treatment of observations.

GEOTECHNICAL ANALYSIS, DESIGN CRITERIA AND CONSTRUCTION TECHNIQUES OF FOUNDATIONS AND RETAINING STRUCTURES.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

THE AIM OF THE COURSE IS TO PROVIDE THE TOOLS FOR STRUCTURAL ASSESSMENT OF EXISTING CONSTRUCTIONS. THE MAIN ISSUES CONCERNING MASONRY AND R.C. STRUCTURES ARE CONSIDERED, INCLUDING RECURRING FAILURE CONDITIONS, INSPECTION METHODS, STRENGTHENING CRITERIA AND STRUCTURAL REHABILITATION TECHNIQUES.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

The aim is to increase the knowledge of the fundamentals of the hydraulics, In particular kinematics and liquid dynamics in order to estimate the phenomenological behaviour and to calculate the acting forces.
Outlines and suitable models are introduced for the treatment of complex hydraulic problems, as prerequisite for the courses of the hydraulic engineering area.

The main goal of the course is to provide students with the necessary logical and analytical tools to face the analysis of economic phenomena, with a particular focus on the identification of production methods, the association between prices and other distributive variables, the different logical path behind different markets

THE PURPOSE OF THE COURSE IS TO FURNISH AN INTRODUCTION TO APPROXIMATE VARIATIONAL METHODS AND TO DIFFERENCE METHODS APPLIED TO ENGINEERING PROBLEMS. MATHEMATICAL MODELS FOR HYDRAULIC AND STRUCTURAL ENGINEERING WILL BE NUMERICAL SOLVED BY COMPUTER USING THE SOFTWARE MATHEMATICA

The course is divided into two parts:
- a first section (6 CFU) aims at providing students with specific tools in order to: (i) assess the environmental value of business initiatives and their environmental sustainability; (ii) deal with environmental communication and environmental auditing. Specific attention will be paid to issues relating to the management of green energy, water and the waste cycle and with reference to the legal aspects relating to business environmental regulations.
- another section (3 CFU) analyses the issues relating to sustainable business by considering a dual perspective: a production-related viewpoint and a distribution-related aspect.

The course aims at providing the knowledge necessary to evaluate heat transfer processes (conduction, convection, radiation) between bodies and inside a body, as well as the temperature variations these processes cause. Another area is that of indoor thermal comfort.

THE OBJECTIVE OF THE COURSE IS THE DEFINITION OF MODEL FOR THE SIMULATION OF ENVIRONMENTAL HYDRAULICS PHOENOMENA

It presents an overview of Earth Sciences, illustrating the basic concepts of geology: the form, materials, internal dynamics, geological cycles. It provides the basic tools for reading and interpretation of geological maps at different scales. It provides the skills necessary to interpret the geological survey. It provides information relating to natural hazards, natural resources and environmental impact

TEACHING MAKES THE GENERAL TERMS, EVEN IN RELATION TO REGIONAL AND NATIONAL LEGISLATION ON WASTE MANAGEMENT (COLLECTION, TREATMENT AND DISPOSAL) AND RECLAMATION OF CONTAMINATED SITES.

THE PURPOSE OF THE COURSE IS TO FURNISH AN INTRODUCTION TO APPROXIMATE VARIATIONAL METHODS AND TO DIFFERENCE METHODS APPLIED TO ENGINEERING PROBLEMS. MATHEMATICAL MODELS FOR HYDRAULIC AND STRUCTURAL ENGINEERING WILL BE NUMERICAL SOLVED BY COMPUTER USING THE SOFTWARE MATHEMATICA

ITALIAN DECREE 81.08 AND BS OHSAS 18001:07. WHY ORGANIZATIONS ARE IMPLEMENTING AN OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS) AS PART OF THEIR RISK MANAGEMENT STRATEGY TO ADDRESS CHANGING LEGISLATION AND PROTECT THEIR WORKFORCE? THE ITALIAN DVR (RISK ASSESSMENT DOCUMENT) AND THE ART. 30. THE OHSMS AS A TOOL OF PROMOTION OF SAFE AND HEALTHY WORKING ENVIRONMENT. LEGISLATIVE COMPLIANCE AND OVERALL PERFORMANCE IMPROVING.OHSAS 18001:07 E UNI INAIL GUIDE LINES. THE INTERNATIONALLY RECOGNIZED ASSESSMENT SPECIFICATION FOR OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS. THE OHSAS 18001:07 COMPATIBILITY WITH ISO 9001 AND ISO 14001. THE PLAN – DO –CHECK – ACT SYSTEM. THE DEMING WHEEL.IMPROVING THE OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS). PLANNING FOR HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL. OHSAS MANAGEMENT PROGRAMME. STRUCTURE AND RESPONSIBILITY. TRAINING, AWARENESS AND COMPETENCE. CONSULTATION AND COMMUNICATION. OPERATIONAL CONTROL. EMERGENCY PREPAREDNESS AND RESPONSE. PERFORMANCE MEASURING, MONITORING AND IMPROVEMENT.OHSAS 18001:07 CONCLUSIONS. OHSMS AS AN EFFECTIVE TOOL TO REDUCE THE RISKS ASSOCIATED WITH HEALTH AND SAFETY IN THE WORKING ENVIRONMENT FOR EMPLOYEES, CUSTOMERS AND THE GENERAL PUBLIC. DATA AND CASE STUDIES.

To provide basic knowledge on major theoretical, methodological and operational issues involved in surveying, so that the student can acquire the necessary skills to design and perform a survey and to process the data related to it. We discuss the basic principles of geodesy and cartography, the principles of surveying and the quantities that can be measured with the topographical instruments, both terrestrial and satellite, the survey methods and the treatment of observations.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

THE OBJECTIVE OF THE COURSE IS THE DEFINITION OF MODEL FOR THE SIMULATION OF ENVIRONMENTAL HYDRAULICS PHOENOMENA

THE AIM OF THE COURSE IS TO PROVIDE THE TOOLS FOR STRUCTURAL ASSESSMENT OF EXISTING CONSTRUCTIONS. THE MAIN ISSUES CONCERNING MASONRY AND R.C. STRUCTURES ARE CONSIDERED, INCLUDING RECURRING FAILURE CONDITIONS, INSPECTION METHODS, STRENGTHENING CRITERIA AND STRUCTURAL REHABILITATION TECHNIQUES.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

To provide students with basic knowledge of Coastal and Maritime Engineering. Understanding of the basic meteoceanographic and hydraulic coastal processes: wind, currents, tides, waves. To provide with the fundamental design tools/methods for the design of coastal structures, with specific reference to rubble mound and caisson breakwaters. Basic rules for planning and designing harbours, with specific reference to marinas.

THE AIM OF THE CLASS IS TO ACQUIRE THE KNOWLEDGE OF THE MATERIALS USED IN CIVIL ENGINEERING, TO PERFORM TESTS ON MATERIALS AND TO COMPREHEND THE ENVIRONMENTAL IMPACT FROM THEIR USE.

The main goal of the course is to provide students with the necessary logical and analytical tools to face the analysis of economic phenomena, with a particular focus on the identification of production methods, the association between prices and other distributive variables, the different logical path behind different markets

The course is divided into two parts:
- a first section (6 CFU) aims at providing students with specific tools in order to: (i) assess the environmental value of business initiatives and their environmental sustainability; (ii) deal with environmental communication and environmental auditing. Specific attention will be paid to issues relating to the management of green energy, water and the waste cycle and with reference to the legal aspects relating to business environmental regulations.
- another section (3 CFU) analyses the issues relating to sustainable business by considering a dual perspective: a production-related viewpoint and a distribution-related aspect.

The course aims to provide students with basic knowledge regarding the management of public works in the field of civil engineering. Particular references will be done to the current regulations, the administrative procedures, and conceptual and methodological aspects from which the related technical activities derive.

TEACHING IS TO PROVIDE THE KEY ELEMENTS FOR THE DESIGN OF WASTE WATER TREATMENT PLANT. WILL BE ANALYZED ASPECTS CONCERNING THE WATER POLLUTION AND THE BASIC PRINCIPLES OF WASTEWATER DOMESTIC TREATMENT.

TO PROVIDE THE FUNDAMENTAL ELEMENTS OF PROBABILITY THEORY AND MATHEMATICAL STATISTICS, ALONG WITH SOME TOOLS OF PARAMETRIC STATISTICS, WHICH MAY BE USEFUL IN PRACTICE.

THE COURSE OBJECTIVE IS TO PROVIDE AT STUDENTS SUITABLE LECTURES FOR AN INTRODUCTION TO THE ELECTRICAL ENGINEERING.

The course aims at providing the knowledge necessary to evaluate heat transfer processes (conduction, convection, radiation) between bodies and inside a body, as well as the temperature variations these processes cause. Another area is that of indoor thermal comfort.

The course include a wide set of concepts related to the main topics belonging to applied ecology arena. During the course the students have the opportunity of investigate the project cycle (analysis of biodiversity values, quantification, identifiation of anthropogenic threats, development of specific response strategies following plans, projects, management actions).

GEOTECHNICAL ANALYSIS, DESIGN CRITERIA AND CONSTRUCTION TECHNIQUES OF FOUNDATIONS AND RETAINING STRUCTURES.

VARIATIONAL AND ENERGY FORMULATIONS OF EQUILIBIUM IN LINEAR ELASTICITY, AND THEIR USE IN APPOXIMATE METHODS OF SOLUTION OF EQUILIBRIUM PROBLEMS; APPLICATIONS TO EQUILIBRIUM OF PLATES.

It presents an overview of Earth Sciences, illustrating the basic concepts of geology: the form, materials, internal dynamics, geological cycles. It provides the basic tools for reading and interpretation of geological maps at different scales. It provides the skills necessary to interpret the geological survey. It provides information relating to natural hazards, natural resources and environmental impact

THE AIM OF THE CLASS IS TO ACQUIRE THE KNOWLEDGE OF THE MATERIALS USED IN CIVIL ENGINEERING, TO PERFORM TESTS ON MATERIALS AND TO COMPREHEND THE ENVIRONMENTAL IMPACT FROM THEIR USE.

TEACHING MAKES THE GENERAL TERMS, EVEN IN RELATION TO REGIONAL AND NATIONAL LEGISLATION ON WASTE MANAGEMENT (COLLECTION, TREATMENT AND DISPOSAL) AND RECLAMATION OF CONTAMINATED SITES.

The course aims to provide students with basic knowledge regarding the management of public works in the field of civil engineering. Particular references will be done to the current regulations, the administrative procedures, and conceptual and methodological aspects from which the related technical activities derive.

TEACHING IS TO PROVIDE THE KEY ELEMENTS FOR THE DESIGN OF WASTE WATER TREATMENT PLANT. WILL BE ANALYZED ASPECTS CONCERNING THE WATER POLLUTION AND THE BASIC PRINCIPLES OF WASTEWATER DOMESTIC TREATMENT.

TO PROVIDE THE FUNDAMENTAL ELEMENTS OF PROBABILITY THEORY AND MATHEMATICAL STATISTICS, ALONG WITH SOME TOOLS OF PARAMETRIC STATISTICS, WHICH MAY BE USEFUL IN PRACTICE.

A GOAL OF THE COURSE IS TO SHOW THE COMMON FORMAL STRUCTURE SHARED BY ALL THE TYPICAL PROBLEMS OF LINEAR ELASTO-DYNAMICS AND TO ILLUSTRATE THE ANALYTICAL METHODS USED TO GRASP SUCH PROBLEMS; MOREOVER, SOME PROTOTYPE PROBLEMS WILL BE EXTENSIVELY ANALYZED AND EXPOUNDED. AS A COMPLEMENT, ARE PROVIDED COMPUTER PRACTICALS WITH THE USE OF SCIENTIFIC SOFTWARE TO IMPLEMENT THE PROBLEMS STUDIED.

ITALIAN DECREE 81.08 AND BS OHSAS 18001:07. WHY ORGANIZATIONS ARE IMPLEMENTING AN OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS) AS PART OF THEIR RISK MANAGEMENT STRATEGY TO ADDRESS CHANGING LEGISLATION AND PROTECT THEIR WORKFORCE? THE ITALIAN DVR (RISK ASSESSMENT DOCUMENT) AND THE ART. 30. THE OHSMS AS A TOOL OF PROMOTION OF SAFE AND HEALTHY WORKING ENVIRONMENT. LEGISLATIVE COMPLIANCE AND OVERALL PERFORMANCE IMPROVING.OHSAS 18001:07 E UNI INAIL GUIDE LINES. THE INTERNATIONALLY RECOGNIZED ASSESSMENT SPECIFICATION FOR OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS. THE OHSAS 18001:07 COMPATIBILITY WITH ISO 9001 AND ISO 14001. THE PLAN – DO –CHECK – ACT SYSTEM. THE DEMING WHEEL.IMPROVING THE OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS). PLANNING FOR HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL. OHSAS MANAGEMENT PROGRAMME. STRUCTURE AND RESPONSIBILITY. TRAINING, AWARENESS AND COMPETENCE. CONSULTATION AND COMMUNICATION. OPERATIONAL CONTROL. EMERGENCY PREPAREDNESS AND RESPONSE. PERFORMANCE MEASURING, MONITORING AND IMPROVEMENT.OHSAS 18001:07 CONCLUSIONS. OHSMS AS AN EFFECTIVE TOOL TO REDUCE THE RISKS ASSOCIATED WITH HEALTH AND SAFETY IN THE WORKING ENVIRONMENT FOR EMPLOYEES, CUSTOMERS AND THE GENERAL PUBLIC. DATA AND CASE STUDIES.

THE COURSE OBJECTIVE IS TO PROVIDE AT STUDENTS SUITABLE LECTURES FOR AN INTRODUCTION TO THE ELECTRICAL ENGINEERING.

The course include a wide set of concepts related to the main topics belonging to applied ecology arena. During the course the students have the opportunity of investigate the project cycle (analysis of biodiversity values, quantification, identifiation of anthropogenic threats, development of specific response strategies following plans, projects, management actions).

To provide basic knowledge on major theoretical, methodological and operational issues involved in surveying, so that the student can acquire the necessary skills to design and perform a survey and to process the data related to it. We discuss the basic principles of geodesy and cartography, the principles of surveying and the quantities that can be measured with the topographical instruments, both terrestrial and satellite, the survey methods and the treatment of observations.

GEOTECHNICAL ANALYSIS, DESIGN CRITERIA AND CONSTRUCTION TECHNIQUES OF FOUNDATIONS AND RETAINING STRUCTURES.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

THE AIM OF THE COURSE IS TO PROVIDE THE TOOLS FOR STRUCTURAL ASSESSMENT OF EXISTING CONSTRUCTIONS. THE MAIN ISSUES CONCERNING MASONRY AND R.C. STRUCTURES ARE CONSIDERED, INCLUDING RECURRING FAILURE CONDITIONS, INSPECTION METHODS, STRENGTHENING CRITERIA AND STRUCTURAL REHABILITATION TECHNIQUES.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

Bases for design of structures in seismic areas are given. The course consists of a theoretical part in which main aspects of dynamic response and seismic design of different materials and structural typologies are given including an overview of national and international Codes for design. Furthermore a practical application for the design of a structure: a building or a simple structure, is carried out by the students for the entire period of the course. A modulus on seismology is a further essential part of the course.

The main goal of the course is to provide students with the necessary logical and analytical tools to face the analysis of economic phenomena, with a particular focus on the identification of production methods, the association between prices and other distributive variables, the different logical path behind different markets

THE PURPOSE OF THE COURSE IS TO FURNISH AN INTRODUCTION TO APPROXIMATE VARIATIONAL METHODS AND TO DIFFERENCE METHODS APPLIED TO ENGINEERING PROBLEMS. MATHEMATICAL MODELS FOR HYDRAULIC AND STRUCTURAL ENGINEERING WILL BE NUMERICAL SOLVED BY COMPUTER USING THE SOFTWARE MATHEMATICA

The course is divided into two parts:
- a first section (6 CFU) aims at providing students with specific tools in order to: (i) assess the environmental value of business initiatives and their environmental sustainability; (ii) deal with environmental communication and environmental auditing. Specific attention will be paid to issues relating to the management of green energy, water and the waste cycle and with reference to the legal aspects relating to business environmental regulations.
- another section (3 CFU) analyses the issues relating to sustainable business by considering a dual perspective: a production-related viewpoint and a distribution-related aspect.

The course aims at providing the knowledge necessary to evaluate heat transfer processes (conduction, convection, radiation) between bodies and inside a body, as well as the temperature variations these processes cause. Another area is that of indoor thermal comfort.

THE OBJECTIVE OF THE COURSE IS THE DEFINITION OF MODEL FOR THE SIMULATION OF ENVIRONMENTAL HYDRAULICS PHOENOMENA

It presents an overview of Earth Sciences, illustrating the basic concepts of geology: the form, materials, internal dynamics, geological cycles. It provides the basic tools for reading and interpretation of geological maps at different scales. It provides the skills necessary to interpret the geological survey. It provides information relating to natural hazards, natural resources and environmental impact

TEACHING MAKES THE GENERAL TERMS, EVEN IN RELATION TO REGIONAL AND NATIONAL LEGISLATION ON WASTE MANAGEMENT (COLLECTION, TREATMENT AND DISPOSAL) AND RECLAMATION OF CONTAMINATED SITES.

THE PURPOSE OF THE COURSE IS TO FURNISH AN INTRODUCTION TO APPROXIMATE VARIATIONAL METHODS AND TO DIFFERENCE METHODS APPLIED TO ENGINEERING PROBLEMS. MATHEMATICAL MODELS FOR HYDRAULIC AND STRUCTURAL ENGINEERING WILL BE NUMERICAL SOLVED BY COMPUTER USING THE SOFTWARE MATHEMATICA

ITALIAN DECREE 81.08 AND BS OHSAS 18001:07. WHY ORGANIZATIONS ARE IMPLEMENTING AN OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS) AS PART OF THEIR RISK MANAGEMENT STRATEGY TO ADDRESS CHANGING LEGISLATION AND PROTECT THEIR WORKFORCE? THE ITALIAN DVR (RISK ASSESSMENT DOCUMENT) AND THE ART. 30. THE OHSMS AS A TOOL OF PROMOTION OF SAFE AND HEALTHY WORKING ENVIRONMENT. LEGISLATIVE COMPLIANCE AND OVERALL PERFORMANCE IMPROVING.OHSAS 18001:07 E UNI INAIL GUIDE LINES. THE INTERNATIONALLY RECOGNIZED ASSESSMENT SPECIFICATION FOR OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS. THE OHSAS 18001:07 COMPATIBILITY WITH ISO 9001 AND ISO 14001. THE PLAN – DO –CHECK – ACT SYSTEM. THE DEMING WHEEL.IMPROVING THE OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM (OHSMS). PLANNING FOR HAZARD IDENTIFICATION, RISK ASSESSMENT AND RISK CONTROL. OHSAS MANAGEMENT PROGRAMME. STRUCTURE AND RESPONSIBILITY. TRAINING, AWARENESS AND COMPETENCE. CONSULTATION AND COMMUNICATION. OPERATIONAL CONTROL. EMERGENCY PREPAREDNESS AND RESPONSE. PERFORMANCE MEASURING, MONITORING AND IMPROVEMENT.OHSAS 18001:07 CONCLUSIONS. OHSMS AS AN EFFECTIVE TOOL TO REDUCE THE RISKS ASSOCIATED WITH HEALTH AND SAFETY IN THE WORKING ENVIRONMENT FOR EMPLOYEES, CUSTOMERS AND THE GENERAL PUBLIC. DATA AND CASE STUDIES.

To provide basic knowledge on major theoretical, methodological and operational issues involved in surveying, so that the student can acquire the necessary skills to design and perform a survey and to process the data related to it. We discuss the basic principles of geodesy and cartography, the principles of surveying and the quantities that can be measured with the topographical instruments, both terrestrial and satellite, the survey methods and the treatment of observations.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

THE AIM OF THE COURSE IS TO PROVIDE THE TOOLS FOR STRUCTURAL ASSESSMENT OF EXISTING CONSTRUCTIONS. THE MAIN ISSUES CONCERNING MASONRY AND R.C. STRUCTURES ARE CONSIDERED, INCLUDING RECURRING FAILURE CONDITIONS, INSPECTION METHODS, STRENGTHENING CRITERIA AND STRUCTURAL REHABILITATION TECHNIQUES.

THE COURSE AIMS TO PROVIDE STUDENTS ADDITIONAL KNOWLEDGE IN ADDITION TO WHAT ALREADY LEARNED IN PREVIOUS COURSES. EMPHASIS IS PAID ON STRUCTURES THAT REQUIRE AN ADEQUATE SPECIALIZATION: PRESTRESSED CONCRETE STRUCTURES AND COMPOSITE STEEL-CONCRETE. THE STUDENT WILL LEARN THE THEORETICAL AND ANALYTICAL-NUMERICAL TOOLS FOR THE DESIGN AND TESTING OF SUCH A STRUCTURES, WITH REFERENCE TO THE CURRENT NATIONAL CODE AND EUROCODES. FINALLY AN INTRODUCTION TO DESIGN METHODS OF D-REGIONS WILL BE PROVIDED.

To provide students with basic knowledge of Coastal and Maritime Engineering. Understanding of the basic meteoceanographic and hydraulic coastal processes: wind, currents, tides, waves. To provide with the fundamental design tools/methods for the design of coastal structures, with specific reference to rubble mound and caisson breakwaters. Basic rules for planning and designing harbours, with specific reference to marinas.

THE AIM OF THE CLASS IS TO ACQUIRE THE KNOWLEDGE OF THE MATERIALS USED IN CIVIL ENGINEERING, TO PERFORM TESTS ON MATERIALS AND TO COMPREHEND THE ENVIRONMENTAL IMPACT FROM THEIR USE.

The main goal of the course is to provide students with the necessary logical and analytical tools to face the analysis of economic phenomena, with a particular focus on the identification of production methods, the association between prices and other distributive variables, the different logical path behind different markets

The course is divided into two parts:
- a first section (6 CFU) aims at providing students with specific tools in order to: (i) assess the environmental value of business initiatives and their environmental sustainability; (ii) deal with environmental communication and environmental auditing. Specific attention will be paid to issues relating to the management of green energy, water and the waste cycle and with reference to the legal aspects relating to business environmental regulations.
- another section (3 CFU) analyses the issues relating to sustainable business by considering a dual perspective: a production-related viewpoint and a distribution-related aspect.

The course aims to provide students with basic knowledge regarding the management of public works in the field of civil engineering. Particular references will be done to the current regulations, the administrative procedures, and conceptual and methodological aspects from which the related technical activities derive.

TEACHING IS TO PROVIDE THE KEY ELEMENTS FOR THE DESIGN OF WASTE WATER TREATMENT PLANT. WILL BE ANALYZED ASPECTS CONCERNING THE WATER POLLUTION AND THE BASIC PRINCIPLES OF WASTEWATER DOMESTIC TREATMENT.

TO PROVIDE THE FUNDAMENTAL ELEMENTS OF PROBABILITY THEORY AND MATHEMATICAL STATISTICS, ALONG WITH SOME TOOLS OF PARAMETRIC STATISTICS, WHICH MAY BE USEFUL IN PRACTICE.

The course aims at providing to the student the basic knowledge and analysis tools concerning the design of bridges, with particular reference to small to medium span bridges of simple typology. During the lectures, construction procedures and analysis methods of bridges are shown, including some criteria that guide the student to different design choices. As application, the student will carry out a simple design of a railway or road bridge under the guide of the instructor.

THE COURSE OBJECTIVE IS TO PROVIDE AT STUDENTS SUITABLE LECTURES FOR AN INTRODUCTION TO THE ELECTRICAL ENGINEERING.

The course aims at providing the knowledge necessary to evaluate heat transfer processes (conduction, convection, radiation) between bodies and inside a body, as well as the temperature variations these processes cause. Another area is that of indoor thermal comfort.

The course include a wide set of concepts related to the main topics belonging to applied ecology arena. During the course the students have the opportunity of investigate the project cycle (analysis of biodiversity values, quantification, identifiation of anthropogenic threats, development of specific response strategies following plans, projects, management actions).

GEOTECHNICAL ANALYSIS, DESIGN CRITERIA AND CONSTRUCTION TECHNIQUES OF FOUNDATIONS AND RETAINING STRUCTURES.