Degree Course: Civil engineering for natural hazard mitigation
A.Y. 2023/2024
Autonomia di giudizio
Nell'ambito dell'area dell'ingegneria civile, i laureati magistrali saranno in grado di assumere responsabilità decisionali autonome in progetti anche di grandi dimensioni e di partecipare attivamente al processo decisionale in contesti anche interdisciplinari.
Questo obiettivo sarà perseguito attraverso corsi di insegnamento teorici e progettuali, oltre che con la redazione della tesi di laurea magistrale.
Esso sarà verificato attraverso i relativi esami di profitto e l'esame di laurea magistrale.Abilità comunicative
I laureati magistrali saranno in grado di comunicare efficacemente e interagire sulle tematiche di interesse con interlocutori specialisti e non specialisti, anche di alto livello, in contesti interdisciplinari.
Questo obiettivo sarà perseguito e verificato attraverso gli esami di profitto e l'esame finale di laurea magistrale.Capacità di apprendimento
I laureati magistrali avranno sviluppato le basi necessarie per procedere, in maniera autonoma, nell'aggiornamento professionale e nell'approfondimento di studi e ricerche.
Questo obiettivo sarà perseguito e verificato attraverso gli esami di profitto, la tesi di laurea magistrale e l'eventuale attività di tirocinio.Requisiti di ammissione
In relazione alla nuova disciplina in vigore per le Lauree Magistrali (120 cfu) il Collegio Didattico in Ingegneria Civile ha così individuato le conoscenze minime richieste per l'accesso alla Laurea Magistrale in Protezione del Territorio dai Rischi Naturali:
a) Attività formative di base: 36 cfu dagli ambiti disciplinari "matematica, informatica e statistica" e " fisica e chimica" previsti dal decreto 16 marzo 2007 del MUR per la classe delle Lauree L7 in Ingegneria Civile Ambientale.
b) Attività formative caratterizzanti: 45 cfu nei SSD "ICAR/01, ICAR/02,ICAR/07, ICAR/08, ICAR/09" presenti nel decreto 16 marzo 2007 del MUR per la classe delle Lauree L7 in Ingegneria Civile Ambientale, avendo sostenuto almeno un esame per ciascuno dei SSD indicati.
La valutazione del possesso delle dette conoscenze minime sarà realizzata tramite l'analisi del curriculum presentato e, eventualmente, con un colloquio.
Specificamente, sarà effettuata la verifica della personale preparazione con modalità definite nel regolamento didattico del corso di studio.Prova finale
La prova finale è costituita dalla discussione di una tesi originale, elaborata in modo autonomo dallo studente sotto la guida di un relatore ed eventualmente di uno o più correlatori, in eventuale coordinamento con le attività di tirocinio.Orientamento in ingresso
Le azioni di orientamento in ingresso sono improntate alla realizzazione di processi di raccordo con la scuola media secondaria.
Si concretizzano in attività di carattere informativo sui Corsi di Studio (CdS) dell'Ateneo ma anche come impegno condiviso da scuola e università per favorire lo sviluppo di una maggiore consapevolezza da parte degli studenti nel compiere scelte coerenti con le proprie conoscenze, competenze, attitudini e interessi.
Le attività promosse si articolano in:
a) autorientamento;
b) incontri e manifestazioni informative rivolte alle future matricole;
c) sviluppo di servizi online e pubblicazione di guide sull'offerta formativa dei CdS.
Tra le attività svolte in collaborazione con le scuole per lo sviluppo di una maggiore consapevolezza nella scelta, il progetto di autorientamento è un intervento che consente di promuovere un raccordo particolarmente qualificato con alcune scuole medie superiori.
Il progetto, infatti, è articolato in incontri svolti presso le scuole ed è finalizzato a sollecitare nelle future matricole una riflessione sui propri punti di forza e sui criteri di scelta.
La presentazione dell'offerta formativa agli studenti delle scuole superiori prevede tre eventi principali distribuiti nel corso dell'anno accademico ai quali partecipano tutti i CdS.
• Salone dello studente, si svolge presso la fiera di Roma fra ottobre e novembre e coinvolge tradizionalmente tutti gli Atenei del Lazio e molti Atenei fuori Regione, Enti pubblici e privati che si occupano di Formazione e Lavoro.
Roma Tre partecipa a questo evento con un proprio spazio espositivo, con conferenze di presentazione dell'offerta formativa dell'Ateneo e promuove i propri Dipartimenti scientifici grazie all'iniziativa Roma 1,2,3 … Scienze;
• Giornate di Vita Universitaria (GVU), si svolgono ogni anno da dicembre a marzo e sono rivolte agli studenti degli ultimi due anni della scuola secondaria superiore.
Si svolgono in tutti i Dipartimenti dell'Ateneo e costituiscono un'importante occasione per le future matricole per vivere la realtà universitaria.
Gli incontri sono strutturati in modo tale che accanto alla presentazione dei Corsi di Laurea, gli studenti possano anche fare un'esperienza diretta di vita universitaria con la partecipazione ad attività didattiche, laboratori, lezioni o seminari, alle quali partecipano anche studenti seniores che svolgono una significativa mediazione di tipo tutoriale.
Partecipano annualmente circa 5.000 studenti;
• Orientarsi a Roma Tre, rappresenta la manifestazione che chiude le annuali attività di orientamento in ingresso e si svolge in Ateneo a luglio di ogni anno.
L'evento accoglie, perlopiù, studenti romani che partecipano per mettere definitivamente a fuoco la loro scelta universitaria.
Durante la manifestazione viene presentata l'offerta formativa e sono presenti, con un proprio spazio, tutti i principali servizi di Roma Tre, le segreterie didattiche e la segreteria studenti.
I servizi online messi a disposizione dei futuri studenti universitari nel tempo sono aumentati tenendo conto dello sviluppo delle nuove opportunità di comunicazione tramite web.
Inoltre, durante tutte le manifestazioni di presentazione dell'offerta formativa, sono illustrati quei servizi online (siti web di Dipartimento, di Ateneo, Portale dello studente etc.) che possono aiutare gli studenti nella loro scelta.
Il Collegio Didattico organizza alcuni eventi di orientamento per gli studenti che frequentano il corso di laurea triennale in Ingegneria Civile, nell'ambito dei quali una delegazione di docenti presenta il CdS.
Tipicamente la presentazione è organizzata nel periodo primaverile e offerta sia agli studenti del secondo che del terzo anno.
Nel corso dell'anno accademico una Commissione ad hoc del Corso di Studio si occupa di fornire supporto agli studenti laureati triennali provenienti da altro ateneo.
La commissione:
- valuta i curricula pregressi degli studenti;
- verifica i requisiti di ammissione e gli eventuali debiti formativi;
- propone agli studenti un piano di studi con indicazione:
-su eventuali corsi singoli da sostenere prima della ammissione;
-su scelte di piano di studi individuale per finire di colmare i debiti formativi.
Il Collegio Didattico pubblicizza inoltre le attività specifiche dei propri Corsi di Studio, attraverso il sito web (https://didattica.sic.uniroma3.it/), la pagina Facebook (https://www.facebook.com/ingegneriacivileroma3/) e il canale YouTube (https://www.youtube.com/channel/UCIzDXyx06zKxZzV-mwf1XIQ).
Si sottolinea infine come l'esperienza dello studente durante il Corso di Studio triennale in Ingegneria Civile costituisca essa stessa una attività di orientamento significativa ed efficace per una scelta consapevole riguardo alla Laurea Magistrale.Il Corso di Studio in breve
Il corso di laurea mira a formare laureati con solide basi metodologiche e con una elevata qualificazione professionale nell'area dell'Ingegneria Civile per la Protezione dai Rischi Naturali, che siano in grado di operare efficacemente nei numerosi settori applicativi che ne richiedono le competenze, di identificare, formulare e risolvere problemi complessi e/o che richiedano approcci e soluzioni originali, di promuovere e gestire l'innovazione tecnologica, di adeguarsi ai rapidi mutamenti tipici dei settori tecnici.
Lo studente espliciterà le proprie scelte al momento della presentazione,
tramite il sistema informativo di ateneo, del piano di completamento o del piano di studio individuale,
secondo quanto stabilito dal regolamento didattico del corso di studio.
Strutture
FIRST YEAR
First semester
|
Course
|
Credits
|
Scientific Disciplinary Sector Code
|
Contact Hours
|
Exercise Hours
|
Laboratory Hours
|
Personal Study Hours
|
Type of Activity
|
Language
|
|
20801631 -
COMPUTATIONAL MECHANICS
(objectives)
Computational Mechanics is a teaching aimed at providing a deep knowledge on physical-mathematical problem of civil engineering. The course is aimed mainly to develop the skills required for the implementation of numerical models with the software Mathematica for the solution of many mathematical models introduced during the teaching. The numerical methods proposed are based on variational formulation of the mathematical problems, finite elements methods (FEM) and finite difference Method.
The teaching belongs to the “Ingegneria Civile Per la Protezione dai Rischi Naturali” master course, which aims at training engineers towards high professional levels in the fields of the protection of both environment and civil infrastructures from hydrogeological and seismic hazards.
In such framework the teaching aims at defining suitable mathematical-numerical models in the framework of civil engineering and solve them with the help of the software Mathematica.
Upon successful completion of the course, students will be able to: 1) use Mathematica to solve many problems of civil engineering 2) to classify the mathematical models (elliptic, hyperbolic, parabolic…) 3) use suitable numerical schemes for the resolution of many mathematical problem (variational methods, FEM, finite difference method)
|
6
|
MAT/07
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801651 -
STRUCTURAL DYNAMICS
(objectives)
Structural dynamics is a basic course that aims at providing fundamental knowledge concerning the dynamical response in the linear regime of typical civil engineering structures, in order to develop the skills necessary for the deployment and analysis of simple mechanical models to make sensible design choices as regards the response of a structure to dynamic inputs. This course is part of the master's degree program in "Civil Engineering for Protection from Natural Risks", which aims at training a civil engineer with high professional qualifications in the protection from hydrogeological and seismic hazards. The course aims at provide an in-depth knowledge 1) of the methods for setting up mathematical models that capture the essential aspects of the dynamic response of a structure; 2) basic concepts for the study of linear systems with a finite number of degrees of freedom; 3) of the essential concepts for the study of the dynamic response of continuous systems. At the end of the course students will be able to: 1) know how to use the methods of theoretical mechanics and mechanics of structures to schematize a real structure using a model that captures the essential aspects of the dynamic response; 2) evaluate the dynamic response of systems with a finite number of degrees of freedom; 3) evaluate the dynamic response of continuous systems.
|
6
|
ICAR/08
|
54
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20810101 -
METODI NUMERICI E STATISTICI PER L'INGEGNERIA CIVILE
(objectives)
Numerical and statistical methods for Civil Engineering aims at providing students with fundamental knowledge on numerical and statistical methods for civil engineering problems, and at developing the competences required for designing and coding simple numerical and statistical models, also to learn how apply high level softwares for engineering analysis.
The course aims at providing in depth knowledge of 1) a technical/scientific programming language; 2) main numerical methods for the solution of ordinary and partial differential equations; 3) descriptive and inferential statistics.
Students shall be able of: 1) using a technical/scientific programming language to develop numerical models and to carry out statistical analyses; 2) designing, developing, validating and applying algorithms for the integration of ordinary and partial differential equations of interest for the civil engineering field; 3) carrying out statistical analysis on large datasets; 4) designing and carrying out statistical analyses; 5) finding and understanding scientific publications for specific problems of interest, also using scientific search engines/databases (Scopus, Web Of Science)
|
6
|
MAT/06
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
Optional Group:
STRUTTURE Orientamento unico AFFINI INTEGRATIVE - (show)
|
12
|
|
|
|
|
|
|
|
|
20801616 -
APPLIED GEOLOGY
(objectives)
IT PRESENTS AN OVERVIEW OF EARTH SCIENCES, ILLUSTRATING THE BASIC CONCEPTS OF GEOLOGY: THE FORM, MATERIALS, INTERNAL DYNAMICS, GEOLOGICAL CYCLES. IT PROVIDES THE BASIC TOOLS FOR READING AND INTERPRETATION OF GEOLOGICAL MAPS AT DIFFERENT SCALES. IT PROVIDES THE SKILLS NECESSARY TO INTERPRET THE GEOLOGICAL SURVEY. IT PROVIDES INFORMATION RELATING TO NATURAL HAZARDS, NATURAL RESOURCES AND ENVIRONMENTAL IMPACT
|
6
|
GEO/05
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801617 -
MATERIALS FOR CIVIL ENGINEERING
(objectives)
THE AIM OF THE CLASS IS TO ACQUIRE THE KNOWLEDGE OF THE MATERIALS USED IN CIVIL ENGINEERING, TO PERFORM TESTS ON MATERIALS AND TO COMPREHEND THE ENVIRONMENTAL IMPACT FROM THEIR USE.
|
6
|
ING-IND/22
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801621 -
ENVIRONMENTAL HEALTH ENGINEERING
(objectives)
The main scope of the course is to provide students with the basic knowledge of environmental engineering.
The course belongs to the three-year degree in Civil Engineering, whose aim is to prepare students in civil engineering by providing tools for the design, construction, maintenance and management of civil structures and infrastructures, such as buildings, bridges, tunnels, transport systems, hydraulic works and land protection. Road Materials is also a course of the master degrees in Road Infrastructures and Transport and Civil Engineering for Protection from Natural Risks, whose objective is training a highly professional figure in civil engineering with specific knowledge and skills in road infrastructures design and management and transportation issues and protection from hydrogeological and seismic risks, respectively.
Within such framework, the course aims at providing students with the basic knowledge and understanding about 1) the biotic and abiotic environment, with references to ecology, chemistry and biology principles; 2) the reference environmental legislation; 3) water, atmosphere and soil quality parameters; 4) the processes of diffusion of pollutants in the environment; 5) treatment techniques.
Upon successful completion of the course, students will be able to 1) evaluate the quality parameters of water, atmosphere and soil in relation to the current legislation 2) analyze the different engineering techniques of water, atmosphere and soil treatment in function of the type of pollutant; 3) basic knowledge of the integrated management of urban solid waste.
|
6
|
ICAR/03
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801641 -
PUBLIC WORKS' LEGISLATION AND LAW
(objectives)
THE COURSE AIMS TO PROVIDE STUDENTS WITH BASIC KNOWLEDGE REGARDING THE MANAGEMENT OF PUBLIC WORKS IN THE FIELD OF CIVIL ENGINEERING. PARTICULAR REFERENCES WILL BE DONE TO THE CURRENT REGULATIONS, THE ADMINISTRATIVE PROCEDURES, AND CONCEPTUAL AND METHODOLOGICAL ASPECTS FROM WHICH THE RELATED TECHNICAL ACTIVITIES DERIVE.
|
|
|
20801641-2 -
DIRITTO DEI LAVORI PUBBLICI
(objectives)
FORMATIVE AIMS THE COURSE AIMS TO PROVIDE STUDENTS WITH BASIC KNOWLEDGE REGARDING THE MANAGEMENT OF PUBLIC WORKS IN THE FIELD OF CIVIL ENGINEERING. PARTICULAR REFERENCES WILL BE DONE TO THE CURRENT REGULATIONS, THE ADMINISTRATIVE PROCEDURES, AND CONCEPTUAL AND METHODOLOGICAL ASPECTS FROM WHICH THE RELATED TECHNICAL ACTIVITIES DERIVE.
|
3
|
IUS/10
|
27
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801641-1 -
DIRITTO AMMINISTRATIVO E DELL'AMBIENTE
(objectives)
FORMATIVE AIMS THE COURSE AIMS TO PROVIDE STUDENTS WITH BASIC KNOWLEDGE REGARDING THE MANAGEMENT OF PUBLIC WORKS IN THE FIELD OF CIVIL ENGINEERING. PARTICULAR REFERENCES WILL BE DONE TO THE CURRENT REGULATIONS, THE ADMINISTRATIVE PROCEDURES, AND CONCEPTUAL AND METHODOLOGICAL ASPECTS FROM WHICH THE RELATED TECHNICAL ACTIVITIES DERIVE.
|
3
|
IUS/10
|
27
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801643 -
PURIFICATION PLANTS
|
Also available in another semester or year
|
|
20801672 -
ENVIRONMENTAL TECHNICAL PHYSICS
|
Also available in another semester or year
|
|
20802041 -
RETROFITTING OF STRUCTURES
(objectives)
The course of Rehabilitation of Structure is part of the master's degree program in Civil Engineering for Natural Risk Mitigation, which aims to train a civil engineer with high professional qualifications concerning the hydrogeological and seismic risk mitigation.
As part of the Master degree program, the course of rehabilitation of structures aims at providing the fundamental tools for the assessment of existing masonry constructions. The program includes the mechanics of masonry structures, the typical damage state, the methods for survey and field testing, and the design criteria and the technologies for structural rehabilitation.
|
6
|
ICAR/19
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20802129 -
Fundamentals of Business and Accounting for students of Engineering
|
Also available in another semester or year
|
|
20810106 -
SICUREZZA E ORGANIZZAZIONE DEL LAVORO IN CANTIERE
(objectives)
Safety at work and environmental defence aims at providing knowledge and competences on safety at work in civil engineering construction activities, with specific focus on rules and laws and on the professional roles in the field.
At the end of the course students shall be able of acting as coordinators safety measurements design and implementation according to the Italian laws.
|
6
|
ING-IND/28
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
Second semester
|
Course
|
Credits
|
Scientific Disciplinary Sector Code
|
Contact Hours
|
Exercise Hours
|
Laboratory Hours
|
Personal Study Hours
|
Type of Activity
|
Language
|
|
20801615 -
THEORY OF STRUCTURES
(objectives)
Theory of Structures is a course whose aim is to provide fundamental knowledge concerning the mono- and bi-dimensional models that find their typical applications in Civil Engineering, so as to allow their consciuos use in common engineering practice. This course is part of the master's degree program in "Civil Engineering for Protection from Natural Risks", whose objective is to train civil engineers with high professional qualifications for the protection from hydrogeological and from seismic risks. Within the framework of this course, the course aims to provide an in-depth knowledge of 1) mono- and bi-dimensional structural models; 2) of some numerical techniques for structural computation. At the end of the course students will be able to: 1) know how to choose the correct model to evaluate the response of a real structure; 2) use the chose model to evaluate the response of the structure, both analytically and numerically.
|
6
|
ICAR/08
|
54
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20802028 -
GEOTECHNICS II
(objectives)
Geotechnics II aims at providing knowledge and competences for the proper definition of geotechnical models, for the planning of sampling and testing campaigns, both in situ and in laboratory, for the design of foundations of civil infrastructures and structures.
At the end of the course students shall be able of 1) selecting the appropriate sampling and testing techniques; 2) providing a correct interpretation of the available data and defining a geotechnical model of the soil, to develop the design of foundations; 3) carrying out analyses aimed at the predicting the operational behaviour and the potential failure modes of the most common geotechnical structures; 4) preparing a report that clearly illustrates the models and the results of the analyses.
|
9
|
ICAR/07
|
81
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20810255 -
SPECIAL STRUCTURES
(objectives)
The course of Special Structures is part of the master's degree program in Civil Engineering for Natural Risk Mitigation, which aims to train a civil engineer with high professional qualifications concerning the hydrogeological and seismic risk mitigation.
As part of the master’s degree program, the course of Special Structures aims to provide students with theoretical knowledge and engineering skills to understand the behavior and to design structures with advanced technologies and innovative materials, such as: (1) steel-concrete composite structures, (2) prestressed concrete structures, (3) precast structures, (4) high performance concretes and special internal reinforcements for structures exposed to severe environmental aggression, (5) structural retrofitting with FRP/FRCM composites, and (6) 3D-printed digital concrete.
At the end of the course, students will gain transversal skills to (1) design new structures and retrofit existing structures with advanced technologies and innovative materials, (2) make choices based on construction/working phases, and (3) orient themselves in technical literature (building codes, guidelines, scientific papers). Moreover, the course will foster the development of engineering sensitivity towards sustainability in constructions, regarding (1) for new structures: technologies and design solutions that optimize building processes and material consumption, and structural durability according to a life-cycle design approach, and (2) for existing structures: innovative strengthening materials for the retrofitting and conservation of the built heritage.
|
7
|
ICAR/09
|
63
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
Optional Group:
STRUTTURE Orientamento unico AFFINI INTEGRATIVE - (show)
|
12
|
|
|
|
|
|
|
|
|
20801616 -
APPLIED GEOLOGY
|
Also available in another semester or year
|
|
20801617 -
MATERIALS FOR CIVIL ENGINEERING
|
Also available in another semester or year
|
|
20801621 -
ENVIRONMENTAL HEALTH ENGINEERING
|
Also available in another semester or year
|
|
20801641 -
PUBLIC WORKS' LEGISLATION AND LAW
(objectives)
THE COURSE AIMS TO PROVIDE STUDENTS WITH BASIC KNOWLEDGE REGARDING THE MANAGEMENT OF PUBLIC WORKS IN THE FIELD OF CIVIL ENGINEERING. PARTICULAR REFERENCES WILL BE DONE TO THE CURRENT REGULATIONS, THE ADMINISTRATIVE PROCEDURES, AND CONCEPTUAL AND METHODOLOGICAL ASPECTS FROM WHICH THE RELATED TECHNICAL ACTIVITIES DERIVE.
|
|
|
20801641-2 -
DIRITTO DEI LAVORI PUBBLICI
|
Also available in another semester or year
|
|
20801641-1 -
DIRITTO AMMINISTRATIVO E DELL'AMBIENTE
|
Also available in another semester or year
|
|
20801643 -
PURIFICATION PLANTS
(objectives)
The main scope of the course is to provide students with the basic knowledge and develop the fundamental skills of (i) civil and industrial wastewater management, and (ii) key elements for the design of wastewater treatment plant.
The course belongs to the master degree in Civil Engineering for the protection from natural hazards, which aims to prepare highly qualified students in civil engineering by providing tools for the design, construction, maintenance and management of civil structures and infrastructures.
Within such framework, the course aims at providing students with the basic knowledge and understanding about: 1) the reference legislation for the spillage of wastewater into receiving water bodies; 2) the characterization of wastewater; 3) wastewater treatment plant; 4) treatment and management of the resulting sludge; 5) low or high technology plant layouts.
Upon successful completion of the course, students will be able to 1) design some sewage treatment units 2) evaluate the design alternatives according to the type of incoming wastewater and with reference to the current legislation.
|
6
|
ICAR/03
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801672 -
ENVIRONMENTAL TECHNICAL PHYSICS
(objectives)
THE COURSE AIMS AT PROVIDING THE KNOWLEDGE NECESSARY TO EVALUATE HEAT TRANSFER PROCESSES (CONDUCTION, CONVECTION, RADIATION) BETWEEN BODIES AND INSIDE A BODY, AS WELL AS THE TEMPERATURE VARIATIONS THESE PROCESSES CAUSE. ANOTHER AREA IS THAT OF INDOOR THERMAL COMFORT.
|
6
|
ING-IND/11
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20802041 -
RETROFITTING OF STRUCTURES
|
Also available in another semester or year
|
|
20802129 -
Fundamentals of Business and Accounting for students of Engineering
(objectives)
THE MAIN GOAL OF THE COURSE IS TO DRIVE THE ENGINEERING STUDENTS THROUGH THE ORGANIZATION OF THE FIRMS, BY DEFINING THEIR LOGICAL BOUNDARIES AND THEIR MAIN CHARACTERISTICS. AT THE END OF THE LESSONS, THE STUDENTS ARE EXPECTED TO BE ABLE TO KNOW THE INSTITUTIONAL MATTERS OF THE FIRMS (BOTH PROFIT ORIENTED AND NOT FOR PROFIT), THEIR OBJECTIVES AND THE MAIN WAYS THEY HAVE TO PURSUE IN ORDER ACHIEVE THEIR OWN GOALS.
|
6
|
ING-IND/35
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20810106 -
SICUREZZA E ORGANIZZAZIONE DEL LAVORO IN CANTIERE
|
Also available in another semester or year
|
|
SECOND YEAR
First semester
|
Course
|
Credits
|
Scientific Disciplinary Sector Code
|
Contact Hours
|
Exercise Hours
|
Laboratory Hours
|
Personal Study Hours
|
Type of Activity
|
Language
|
|
20802106 -
COASTAL ENGINEERING
(objectives)
Coastal Engineering aims at providing knowledge and competences for planning and design of structures at sea for beach and harbour protection and other applications in the coastal areas.
A detailed knowledge of the following topics is provided: 1) main meteoceanographical loadings, such as waves, tides, winds and currents; 2) coastal morphologic features; 3) statistical analysis of wave records; 4) models of interactions between waves and beaches and structures; 5) preliminary design of breakwaters.
After the course the students shall be able of: 1) developing statistical analyses on meteoceanographic data, to provide inputs for the design activities; 2) provide a preliminary design of a rubble mound and vertical breakwaters; 3) evaluate the morphodynamic conditions of a beach and the possible protection systems.
|
9
|
ICAR/02
|
81
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20810220 -
CONSTRUCTIONS IN SEISMIC ZONES
(objectives)
The course of Earthquake Engineering is part of the master's degree program in Civil Engineering for Natural Risk Mitigation, which aims to train a civil engineer with high professional qualifications concerning the hydrogeological and seismic risk mitigation.
As part of the Master degree program, the course of Earthquake Engineering provides the basic tools for the design and safety verification of civil structures in earthquake prone regions. The program includes the methodologies for the engineering representation of the seismic action, the fundamentals of the seismic behaviour of buildings, the principles of design of earthquake-resistant structures. The characteristics of earthquake motions are illustrated starting from the fault rupture, the propagation of seismic waves, up to the local registration and the engineering representation of earthquake load, and seismic hazard. The basics of the dynamic response of SDOF and MDOF systems under earthquake motions are recalled. The basic principles of design with regards to structural typologies and regularity are presented and the methods for structural analysis are illustrated. The criteria of design and detailing of structural elements in reinforced concrete are finally presented.
|
9
|
ICAR/09
|
81
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
Second semester
|
Course
|
Credits
|
Scientific Disciplinary Sector Code
|
Contact Hours
|
Exercise Hours
|
Laboratory Hours
|
Personal Study Hours
|
Type of Activity
|
Language
|
|
20810221 -
BRIDGE THEORY AND DESIGN
(objectives)
The course of “Theory and design of Bridges” is part of the master's degree program in Civil Engineering for Natural Risk Mitigation, which aims to train a civil engineer with high professional qualifications concerning the hydrogeological and seismic risk mitigation.
As part of the Master degree program, the course of Theory and design of Bridges aims to provide students with the basic knowledge and analysis tools necessary to deal with the design of simple road and railway small/medium span bridges (box-girder and I-girder), both with prestressed concrete and steel-concrete composite decks. The design criteria, the currently available analysis and constructional methods will be analyzed.
At the end of the course, students will acquire the necessary skills to 1) design the main elements (r.c. slab, deck girders, piers, abutments and foundations) of small/medium span bridges, 2) analyze their structural behavior using simplified and refined models (F.E.M.), even in the presence of rheological behaviors and non-linear phenomena, 3) apply to the main elements of a bridge the design and the assessment methods prescribed by the Italian Code and the Eurocodes, both in ultimate (SLU) and serviceability (SLE) conditions, as well as in presence of exceptional loads such an earthquake, 3) carry out professional structural drawings.
|
8
|
ICAR/09
|
81
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20810000 -
A SCELTA STUDENTE
(objectives)
The Study Plans may include specific internship activities or other training activities according to
the provisions of art. 10 paragraph 5, letters d) and e) of Ministerial Decree 270/2004 for a maximum of 3 credits,
extendable to 6 credits within the activities chosen by the student.
|
12
|
|
-
|
-
|
-
|
-
|
Elective activities
|
ITA |
|
20802015 -
TRAINING
(objectives)
The internship activities must be aimed at completing the highly specialized training of the
master's degree, must therefore ensure strict consistency with the disciplines of the sector that
characterize the degree itself. They must also engage the student on original and particular themes
news, developed in highly qualified internal or external structures of the University
professional and/or research. Where contingent conditions require it, internships may be carried out in
telematic mode.
|
6
|
|
150
|
-
|
-
|
-
|
Other activities
|
ITA |
|
20801908 -
DEGREE THESIS
(objectives)
The final test consists of the discussion of an original thesis, elaborated independently by the
student under the guidance of a supervisor and possibly one or more co-supervisors, if any
coordination with internship activities.
|
24
|
|
216
|
-
|
-
|
-
|
Final examination and foreign language test
|
ITA |
Idraulica
FIRST YEAR
First semester
|
Course
|
Credits
|
Scientific Disciplinary Sector Code
|
Contact Hours
|
Exercise Hours
|
Laboratory Hours
|
Personal Study Hours
|
Type of Activity
|
Language
|
|
20801631 -
COMPUTATIONAL MECHANICS
(objectives)
Computational Mechanics is a teaching aimed at providing a deep knowledge on physical-mathematical problem of civil engineering. The course is aimed mainly to develop the skills required for the implementation of numerical models with the software Mathematica for the solution of many mathematical models introduced during the teaching. The numerical methods proposed are based on variational formulation of the mathematical problems, finite elements methods (FEM) and finite difference Method.
The teaching belongs to the “Ingegneria Civile Per la Protezione dai Rischi Naturali” master course, which aims at training engineers towards high professional levels in the fields of the protection of both environment and civil infrastructures from hydrogeological and seismic hazards.
In such framework the teaching aims at defining suitable mathematical-numerical models in the framework of civil engineering and solve them with the help of the software Mathematica.
Upon successful completion of the course, students will be able to: 1) use Mathematica to solve many problems of civil engineering 2) to classify the mathematical models (elliptic, hyperbolic, parabolic…) 3) use suitable numerical schemes for the resolution of many mathematical problem (variational methods, FEM, finite difference method)
|
6
|
MAT/07
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20802071 -
ADVANCED HYDRAULICS
(objectives)
Advanced Hydraulics is a course aimed at giving a deep knowledge on incompressible fluids motion and on their Mathematical modelling. The course is also aimed at developing the skills necessary to formulate and use basic numerical models for solving the most common mathematical models of applied Hydraulics: the method of characteristics and the finite difference method.
The course belongs to the master of Civil Engineering for the Protection from Natural Hazards, which is aimed at preparing a highly qualified Civil Engineer in the field of the protection of the territory and civil infrastructures from hydrogeological and seismic hazards.
In this framework, the course defines conceptual hydraulic models of increasing complexity, with particular reference to the most common ones: the 1D and 2D hydraulic model.
At the end of the course the student:
1) will own a deep knowledge of Fluid Mechanics;
2) will be able to formulate a model able to simulate a considered phenomenon, starting from the theories dealt during the course;
3) will be able to solve computationally the model using basic numerical methodologies;
4) will be able to interpret critically the results obtained from numerical models.
|
8
|
ICAR/01
|
72
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20810101 -
METODI NUMERICI E STATISTICI PER L'INGEGNERIA CIVILE
(objectives)
Numerical and statistical methods for Civil Engineering aims at providing students with fundamental knowledge on numerical and statistical methods for civil engineering problems, and at developing the competences required for designing and coding simple numerical and statistical models, also to learn how apply high level softwares for engineering analysis.
The course aims at providing in depth knowledge of 1) a technical/scientific programming language; 2) main numerical methods for the solution of ordinary and partial differential equations; 3) descriptive and inferential statistics.
Students shall be able of: 1) using a technical/scientific programming language to develop numerical models and to carry out statistical analyses; 2) designing, developing, validating and applying algorithms for the integration of ordinary and partial differential equations of interest for the civil engineering field; 3) carrying out statistical analysis on large datasets; 4) designing and carrying out statistical analyses; 5) finding and understanding scientific publications for specific problems of interest, also using scientific search engines/databases (Scopus, Web Of Science)
|
6
|
MAT/06
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
Optional Group:
IDRAULICA Orientamento unico AFFINI INTEGRATIVE - (show)
|
12
|
|
|
|
|
|
|
|
|
20801616 -
APPLIED GEOLOGY
(objectives)
IT PRESENTS AN OVERVIEW OF EARTH SCIENCES, ILLUSTRATING THE BASIC CONCEPTS OF GEOLOGY: THE FORM, MATERIALS, INTERNAL DYNAMICS, GEOLOGICAL CYCLES. IT PROVIDES THE BASIC TOOLS FOR READING AND INTERPRETATION OF GEOLOGICAL MAPS AT DIFFERENT SCALES. IT PROVIDES THE SKILLS NECESSARY TO INTERPRET THE GEOLOGICAL SURVEY. IT PROVIDES INFORMATION RELATING TO NATURAL HAZARDS, NATURAL RESOURCES AND ENVIRONMENTAL IMPACT
|
6
|
GEO/05
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801617 -
MATERIALS FOR CIVIL ENGINEERING
(objectives)
THE AIM OF THE CLASS IS TO ACQUIRE THE KNOWLEDGE OF THE MATERIALS USED IN CIVIL ENGINEERING, TO PERFORM TESTS ON MATERIALS AND TO COMPREHEND THE ENVIRONMENTAL IMPACT FROM THEIR USE.
|
6
|
ING-IND/22
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801621 -
ENVIRONMENTAL HEALTH ENGINEERING
(objectives)
The main scope of the course is to provide students with the basic knowledge of environmental engineering.
The course belongs to the three-year degree in Civil Engineering, whose aim is to prepare students in civil engineering by providing tools for the design, construction, maintenance and management of civil structures and infrastructures, such as buildings, bridges, tunnels, transport systems, hydraulic works and land protection. Road Materials is also a course of the master degrees in Road Infrastructures and Transport and Civil Engineering for Protection from Natural Risks, whose objective is training a highly professional figure in civil engineering with specific knowledge and skills in road infrastructures design and management and transportation issues and protection from hydrogeological and seismic risks, respectively.
Within such framework, the course aims at providing students with the basic knowledge and understanding about 1) the biotic and abiotic environment, with references to ecology, chemistry and biology principles; 2) the reference environmental legislation; 3) water, atmosphere and soil quality parameters; 4) the processes of diffusion of pollutants in the environment; 5) treatment techniques.
Upon successful completion of the course, students will be able to 1) evaluate the quality parameters of water, atmosphere and soil in relation to the current legislation 2) analyze the different engineering techniques of water, atmosphere and soil treatment in function of the type of pollutant; 3) basic knowledge of the integrated management of urban solid waste.
|
6
|
ICAR/03
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801641 -
PUBLIC WORKS' LEGISLATION AND LAW
(objectives)
THE COURSE AIMS TO PROVIDE STUDENTS WITH BASIC KNOWLEDGE REGARDING THE MANAGEMENT OF PUBLIC WORKS IN THE FIELD OF CIVIL ENGINEERING. PARTICULAR REFERENCES WILL BE DONE TO THE CURRENT REGULATIONS, THE ADMINISTRATIVE PROCEDURES, AND CONCEPTUAL AND METHODOLOGICAL ASPECTS FROM WHICH THE RELATED TECHNICAL ACTIVITIES DERIVE.
|
|
|
20801641-2 -
DIRITTO DEI LAVORI PUBBLICI
(objectives)
FORMATIVE AIMS THE COURSE AIMS TO PROVIDE STUDENTS WITH BASIC KNOWLEDGE REGARDING THE MANAGEMENT OF PUBLIC WORKS IN THE FIELD OF CIVIL ENGINEERING. PARTICULAR REFERENCES WILL BE DONE TO THE CURRENT REGULATIONS, THE ADMINISTRATIVE PROCEDURES, AND CONCEPTUAL AND METHODOLOGICAL ASPECTS FROM WHICH THE RELATED TECHNICAL ACTIVITIES DERIVE.
|
3
|
IUS/10
|
27
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801641-1 -
DIRITTO AMMINISTRATIVO E DELL'AMBIENTE
(objectives)
FORMATIVE AIMS THE COURSE AIMS TO PROVIDE STUDENTS WITH BASIC KNOWLEDGE REGARDING THE MANAGEMENT OF PUBLIC WORKS IN THE FIELD OF CIVIL ENGINEERING. PARTICULAR REFERENCES WILL BE DONE TO THE CURRENT REGULATIONS, THE ADMINISTRATIVE PROCEDURES, AND CONCEPTUAL AND METHODOLOGICAL ASPECTS FROM WHICH THE RELATED TECHNICAL ACTIVITIES DERIVE.
|
3
|
IUS/10
|
27
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801643 -
PURIFICATION PLANTS
|
Also available in another semester or year
|
|
20801672 -
ENVIRONMENTAL TECHNICAL PHYSICS
|
Also available in another semester or year
|
|
20802041 -
RETROFITTING OF STRUCTURES
(objectives)
The course of Rehabilitation of Structure is part of the master's degree program in Civil Engineering for Natural Risk Mitigation, which aims to train a civil engineer with high professional qualifications concerning the hydrogeological and seismic risk mitigation.
As part of the Master degree program, the course of rehabilitation of structures aims at providing the fundamental tools for the assessment of existing masonry constructions. The program includes the mechanics of masonry structures, the typical damage state, the methods for survey and field testing, and the design criteria and the technologies for structural rehabilitation.
|
6
|
ICAR/19
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20802129 -
Fundamentals of Business and Accounting for students of Engineering
|
Also available in another semester or year
|
|
20810106 -
SICUREZZA E ORGANIZZAZIONE DEL LAVORO IN CANTIERE
(objectives)
Safety at work and environmental defence aims at providing knowledge and competences on safety at work in civil engineering construction activities, with specific focus on rules and laws and on the professional roles in the field.
At the end of the course students shall be able of acting as coordinators safety measurements design and implementation according to the Italian laws.
|
6
|
ING-IND/28
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
Second semester
|
Course
|
Credits
|
Scientific Disciplinary Sector Code
|
Contact Hours
|
Exercise Hours
|
Laboratory Hours
|
Personal Study Hours
|
Type of Activity
|
Language
|
|
20801636 -
APPLIED HYDROLOGY
(objectives)
Applied Hydrology course introduces the student to groundwater and catchment-scale hydrological modeling. Students will address practical problems learning how to build hydrological models and perform hydrological studies for water resources management, and other applications.
This course is part of the master's degree program in "Civil Engineering for Protection from Natural Risks", whose objective is to train civil engineers with high professional qualifications for the protection from hydrogeological and seismic risks.
Within the framework of this course, the course aims to provide an in-depth knowledge of 1) the main physical processes involved in water cycle; 2) fundamental issues related to water resources use; 3) measurement and analysis of hydrologic data; 4) hydrologic modeling of transport in aquifers and vadose zone; 5) hydrologic modeling of surface processes at the catchment scale; 6) main criteria to develop a complex hydrological model.
Upon successful completion of the course, students will be able to 1) identify basic requirments to perform a surface or subsurface hydrological study; 2) define appropriate, even complex, hydrological modelsto determine design quantities (e.g. rainfall, discharge); 3) calibrate and validate hydrological models; 4) perform numerical simulations to define different design scenarios in groundwater studies; 5) perform numerical simulations to estimate design quantities at the catchment scale; 6) prepare project report and drawings.
|
9
|
ICAR/02
|
81
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20802028 -
GEOTECHNICS II
(objectives)
Geotechnics II aims at providing knowledge and competences for the proper definition of geotechnical models, for the planning of sampling and testing campaigns, both in situ and in laboratory, for the design of foundations of civil infrastructures and structures.
At the end of the course students shall be able of 1) selecting the appropriate sampling and testing techniques; 2) providing a correct interpretation of the available data and defining a geotechnical model of the soil, to develop the design of foundations; 3) carrying out analyses aimed at the predicting the operational behaviour and the potential failure modes of the most common geotechnical structures; 4) preparing a report that clearly illustrates the models and the results of the analyses.
|
9
|
ICAR/07
|
81
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
Optional Group:
IDRAULICA Orientamento unico AFFINI INTEGRATIVE - (show)
|
12
|
|
|
|
|
|
|
|
|
20801616 -
APPLIED GEOLOGY
|
Also available in another semester or year
|
|
20801617 -
MATERIALS FOR CIVIL ENGINEERING
|
Also available in another semester or year
|
|
20801621 -
ENVIRONMENTAL HEALTH ENGINEERING
|
Also available in another semester or year
|
|
20801641 -
PUBLIC WORKS' LEGISLATION AND LAW
(objectives)
THE COURSE AIMS TO PROVIDE STUDENTS WITH BASIC KNOWLEDGE REGARDING THE MANAGEMENT OF PUBLIC WORKS IN THE FIELD OF CIVIL ENGINEERING. PARTICULAR REFERENCES WILL BE DONE TO THE CURRENT REGULATIONS, THE ADMINISTRATIVE PROCEDURES, AND CONCEPTUAL AND METHODOLOGICAL ASPECTS FROM WHICH THE RELATED TECHNICAL ACTIVITIES DERIVE.
|
|
|
20801641-2 -
DIRITTO DEI LAVORI PUBBLICI
|
Also available in another semester or year
|
|
20801641-1 -
DIRITTO AMMINISTRATIVO E DELL'AMBIENTE
|
Also available in another semester or year
|
|
20801643 -
PURIFICATION PLANTS
(objectives)
The main scope of the course is to provide students with the basic knowledge and develop the fundamental skills of (i) civil and industrial wastewater management, and (ii) key elements for the design of wastewater treatment plant.
The course belongs to the master degree in Civil Engineering for the protection from natural hazards, which aims to prepare highly qualified students in civil engineering by providing tools for the design, construction, maintenance and management of civil structures and infrastructures.
Within such framework, the course aims at providing students with the basic knowledge and understanding about: 1) the reference legislation for the spillage of wastewater into receiving water bodies; 2) the characterization of wastewater; 3) wastewater treatment plant; 4) treatment and management of the resulting sludge; 5) low or high technology plant layouts.
Upon successful completion of the course, students will be able to 1) design some sewage treatment units 2) evaluate the design alternatives according to the type of incoming wastewater and with reference to the current legislation.
|
6
|
ICAR/03
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20801672 -
ENVIRONMENTAL TECHNICAL PHYSICS
(objectives)
THE COURSE AIMS AT PROVIDING THE KNOWLEDGE NECESSARY TO EVALUATE HEAT TRANSFER PROCESSES (CONDUCTION, CONVECTION, RADIATION) BETWEEN BODIES AND INSIDE A BODY, AS WELL AS THE TEMPERATURE VARIATIONS THESE PROCESSES CAUSE. ANOTHER AREA IS THAT OF INDOOR THERMAL COMFORT.
|
6
|
ING-IND/11
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20802041 -
RETROFITTING OF STRUCTURES
|
Also available in another semester or year
|
|
20802129 -
Fundamentals of Business and Accounting for students of Engineering
(objectives)
THE MAIN GOAL OF THE COURSE IS TO DRIVE THE ENGINEERING STUDENTS THROUGH THE ORGANIZATION OF THE FIRMS, BY DEFINING THEIR LOGICAL BOUNDARIES AND THEIR MAIN CHARACTERISTICS. AT THE END OF THE LESSONS, THE STUDENTS ARE EXPECTED TO BE ABLE TO KNOW THE INSTITUTIONAL MATTERS OF THE FIRMS (BOTH PROFIT ORIENTED AND NOT FOR PROFIT), THEIR OBJECTIVES AND THE MAIN WAYS THEY HAVE TO PURSUE IN ORDER ACHIEVE THEIR OWN GOALS.
|
6
|
ING-IND/35
|
54
|
-
|
-
|
-
|
Related or supplementary learning activities
|
ITA |
|
20810106 -
SICUREZZA E ORGANIZZAZIONE DEL LAVORO IN CANTIERE
|
Also available in another semester or year
|
|
|
20810255 -
SPECIAL STRUCTURES
(objectives)
The course of Special Structures is part of the master's degree program in Civil Engineering for Natural Risk Mitigation, which aims to train a civil engineer with high professional qualifications concerning the hydrogeological and seismic risk mitigation.
As part of the master’s degree program, the course of Special Structures aims to provide students with theoretical knowledge and engineering skills to understand the behavior and to design structures with advanced technologies and innovative materials, such as: (1) steel-concrete composite structures, (2) prestressed concrete structures, (3) precast structures, (4) high performance concretes and special internal reinforcements for structures exposed to severe environmental aggression, (5) structural retrofitting with FRP/FRCM composites, and (6) 3D-printed digital concrete.
At the end of the course, students will gain transversal skills to (1) design new structures and retrofit existing structures with advanced technologies and innovative materials, (2) make choices based on construction/working phases, and (3) orient themselves in technical literature (building codes, guidelines, scientific papers). Moreover, the course will foster the development of engineering sensitivity towards sustainability in constructions, regarding (1) for new structures: technologies and design solutions that optimize building processes and material consumption, and structural durability according to a life-cycle design approach, and (2) for existing structures: innovative strengthening materials for the retrofitting and conservation of the built heritage.
|
7
|
ICAR/09
|
63
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
SECOND YEAR
First semester
|
Course
|
Credits
|
Scientific Disciplinary Sector Code
|
Contact Hours
|
Exercise Hours
|
Laboratory Hours
|
Personal Study Hours
|
Type of Activity
|
Language
|
|
20802106 -
COASTAL ENGINEERING
(objectives)
Coastal Engineering aims at providing knowledge and competences for planning and design of structures at sea for beach and harbour protection and other applications in the coastal areas.
A detailed knowledge of the following topics is provided: 1) main meteoceanographical loadings, such as waves, tides, winds and currents; 2) coastal morphologic features; 3) statistical analysis of wave records; 4) models of interactions between waves and beaches and structures; 5) preliminary design of breakwaters.
After the course the students shall be able of: 1) developing statistical analyses on meteoceanographic data, to provide inputs for the design activities; 2) provide a preliminary design of a rubble mound and vertical breakwaters; 3) evaluate the morphodynamic conditions of a beach and the possible protection systems.
|
9
|
ICAR/02
|
81
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
Optional Group:
IDRAULICA Orientamento unico 6 CFU A SCELTA ICAR/01 - (show)
|
6
|
|
|
|
|
|
|
|
|
20801642 -
POLLUTANT DYNAMICS IN WATER BODIES
(objectives)
Pollutant dynamics in water bodies is a teaching aimed at providing a deep knowledge on transport phenomena of active and passive, conservative and reactive pollutants, in natural water bodies, and at giving their mathematical formulation. The course also aims at consolidating the skills required for the developments of numerical models for the solution of the mathematical models introduced during the teaching.
The teaching belongs to the “Ingegneria Civile Per la Protezione dai Rischi Naturali” master course, which aims at training engineers towards high professional levels in the fields of the protection of both environment and civil infrastructures from hydrogeological and seismic hazards.
In such framework the teaching aims at defining conceptual models with increasing complexity for the representation of advective/diffusive/reactive transport phenomena in water.
Upon successful completion of the course, students will be able to: 1) examine a practical case of propagation of a pollutant in a water body; 2) verify the availability of existing formulations for a proper modelling of the phenomenon at hand; when this is not the case, they will be able to formulate a new one; 3) design and/or interpret experiments and dye studies aimed at determining values for the parameters of the derived model; 4) numerically solve the model, explicitly accounting for sources of uncertainty and their weight on the final result.
|
6
|
ICAR/01
|
54
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20801645 -
HYDRODYNAMICS OF SOLID TRANSPORT
|
Also available in another semester or year
|
|
20802040 -
ENVIRONMENTAL HYDRAULIC
(objectives)
The objective of the course of Environmental Hydraulics is the knowledge of atmospheric and marine/oceanic flows at a meso and large scale and with and without stratification. The course aims at developing the skills needed for the development of suitable schemes and mathematical models simulating environmental hydraulics phenomena. In addition, the course aims at improving the knowledge of the numerical and experimental models used to simulate such flows.
The course is part of the master degree course in “Civil Engineering for Natural Hazard Mitigation” which aims at training a civil engineer with high professional qualification in the territory and civil works protection from hydrogeological and seismic risks.
The course aims at defining conceptual models with different complexity levels for the simulations of atmospheric and marine/oceanic flows.
At the end of the course, the students will be able to: understand the complex dynamics of atmospheric and marine/oceanic flows occurring at different spatial scales with and without stratification; select the suitable models for the simulation of the different flows; understand and use the data obtained by laboratory and /or numerical experiments simulating stratified flows.
|
6
|
ICAR/01
|
54
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
|
Optional Group:
IDRAULICA Orientamento unico 6 CFU A SCELTA ICAR/02 - (show)
|
6
|
|
|
|
|
|
|
|
|
20801647 -
HYDRAULIC PROTECTION OF LAND
|
Also available in another semester or year
|
|
20802083 -
DESIGN OF HARBOURS AND MARITIME STRUCTURES
|
Also available in another semester or year
|
|
20801644 -
WATER QUALITY MANAGEMENT
(objectives)
The main scope of the Water Quality Management course is to provide students with the basic knowledge of the physical and biogeochemical mechanisms controlling the quality of groundwater (flow and contaminant transport modeling in groundwater). Furthermore the course addresses the assessment of contamination level, health risk and groundwater remediation systems.
Water Quality Management course is part of the master's degree program in "Civil Engineering for Protection from Natural Risks", whose objective is to train civil engineers with high professional qualifications for the protection from hydrogeological and seismic risks.
Within the framework of this course, the course aims to provide an in-depth knowledge of 1) flood legislation; 2) contamination sources in natural and anthropic environments; 3) main physical mechanisms of contaminant transport in groundwater and soils; 4) modelling of solute transport in environmental systems most popular computational tools flow and transport modeling in groundwater; 5) health risk due to contaminated groundwater; 6) main groundwater remediation systems.
Upon successful completion of the course, students will be able to 1) identify fundamental criteria and restrictions for the assessment of the environmental concentration and the related health risk ; 2) develop an hydrological/hydraulic model for the study of a contaminated site; 3) perform simulations exploring different contamination scenarios; 4) identify the most appropriate solution for groundwater remediation; 6) prepare project report and drawings.
|
6
|
ICAR/02
|
54
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
Second semester
|
Course
|
Credits
|
Scientific Disciplinary Sector Code
|
Contact Hours
|
Exercise Hours
|
Laboratory Hours
|
Personal Study Hours
|
Type of Activity
|
Language
|
|
Optional Group:
IDRAULICA Orientamento unico 6 CFU A SCELTA ICAR/01 - (show)
|
6
|
|
|
|
|
|
|
|
|
20801642 -
POLLUTANT DYNAMICS IN WATER BODIES
|
Also available in another semester or year
|
|
20801645 -
HYDRODYNAMICS OF SOLID TRANSPORT
(objectives)
Hydrodynamics of sediment transport is a teaching aimed at providing a deep knowledge on sediment transport phenomena in natural rivers and in debris flows phenomena, and at giving their mathematical formulation. The course also aims at consolidating the skills required for the developments of numerical models for the solution of the mathematical models introduced during the teaching.
The teaching belongs to the “Ingegneria Civile Per la Protezione dai Rischi Naturali” master course, which aims at training engineers towards high professional levels in the fields of the protection of both environment and civil infrastructures from hydrogeological and seismic hazards.
In such framework the teaching aims at defining suitable conceptual models for the representation of transport phenomena in natural rivers and in debris flows phenomena.
Upon successful completion of the course, students will be able to: 1) calculate bed load transport in uniform motion of a natural river 2) use 1D model of morphological evolution of the bed river 3) analyse local scour phenomena 4) analyse debris flows phenomena
|
6
|
ICAR/01
|
54
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20802040 -
ENVIRONMENTAL HYDRAULIC
|
Also available in another semester or year
|
|
|
Optional Group:
IDRAULICA Orientamento unico 6 CFU A SCELTA ICAR/02 - (show)
|
6
|
|
|
|
|
|
|
|
|
20801647 -
HYDRAULIC PROTECTION OF LAND
(objectives)
The main scope of the course is to provide students with the basic hydrologic and hydraulic knowledge and develop the fundamental skills for flood risk assessment and management.
Flood Risk Assessment and Management course is part of the master's degree program in "Civil Engineering for Protection from Natural Risks", whose objective is to train civil engineers with high professional qualifications for the protection from hydrogeological and seismic risks.
Within the framework of this course, the course aims to provide an in-depth knowledge of 1) flood legislation; 2) risk definition and methods for its estimation; 3) hydrologic methods for design quantities estimation and hydraulic models for water propagation; 4) most popular computational tools for flood modeling; 5) hydraulic structures for flood control and risk mitigation; 6) main criteria for structure design based on cost-benefit analysis.
Upon successful completion of the course, students will be able to 1) identify fundamental criteria and restrictions for flood defense structure design; 2) perform statistical analysis and estimate the hydrological load acting on the structures (design quantities) using the most appropriate models based on the available hydrological information; 3) estimate flood extent and risk by using the most popular tools for flood modeling; 4) identify the most appropriate solution for risk mitigation based on a cost-benefit analysis; 6) prepare project report and drawings.
|
6
|
ICAR/02
|
54
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20802083 -
DESIGN OF HARBOURS AND MARITIME STRUCTURES
(objectives)
Design of harbours aims at providing knowledge and competences for the design of a complex civil infrastructure, with specific reference to a maritime terminal.
A detailed knowledge of the following topics is provided: 1) main maritime terminals; 2) main maritime structures typologies and design methods; 3) planning and management of engineering design activities; 4) meteoceanographic data statistical analysis and models for the wave propagation into harbours; 5) oral and written presentation methods.
After the course the students shall be able of: 1) specifying the requirements of the project, identifying the constraints and the relevant codes; 2) planning the design activities; 3) developing statistical analyses on meteoceanographic data, to provide inputs for the design activities; 4) applying numerical models for the wave penetration into harbours; 5) defining alternative design solutions and select the optimal one; 6) using cad software and designing the main maritime structures, also providing a preliminary plan of the construction activities; 7) presenting orally the design and writing accurate reports; 8) working in team.
|
6
|
ICAR/02
|
54
|
-
|
-
|
-
|
Core compulsory activities
|
ITA |
|
20801644 -
WATER QUALITY MANAGEMENT
|
Also available in another semester or year
|
|
|
20810000 -
A SCELTA STUDENTE
(objectives)
The Study Plans may include specific internship activities or other training activities according to
the provisions of art. 10 paragraph 5, letters d) and e) of Ministerial Decree 270/2004 for a maximum of 3 credits,
extendable to 6 credits within the activities chosen by the student.
|
12
|
|
-
|
-
|
-
|
-
|
Elective activities
|
ITA |
|
20802015 -
TRAINING
(objectives)
The internship activities must be aimed at completing the highly specialized training of the
master's degree, must therefore ensure strict consistency with the disciplines of the sector that
characterize the degree itself. They must also engage the student on original and particular themes
news, developed in highly qualified internal or external structures of the University
professional and/or research. Where contingent conditions require it, internships may be carried out in
telematic mode.
|
6
|
|
150
|
-
|
-
|
-
|
Other activities
|
ITA |
|
20801908 -
DEGREE THESIS
(objectives)
The final test consists of the discussion of an original thesis, elaborated independently by the
student under the guidance of a supervisor and possibly one or more co-supervisors, if any
coordination with internship activities.
|
24
|
|
216
|
-
|
-
|
-
|
Final examination and foreign language test
|
ITA |
Università Roma Tre